Roof Repair Salt Lake City: The Benefits of Rubber Roofing for Your Home

The experts in roof repair Salt Lake City residents prefer like S&S Roofing are familiar with the disadvantages of using traditional asphalt shingles on low-pitched or flat roofs. Shingles need a little help from gravity to be effective against leaks. Roof shingles are generally constructed in an overlapping manner so that water flows downward and does not accumulate on the roof.  With flat roofs, water can build up and seep in through the shingle seams.

To help create an impenetrable seal that prevents leaks over a flat roof, manufacturers created a roofing material made of rubber. Single-ply rubber roofing is made of synthetic polymers like PVC, which is ideal for flat or low-pitched roofs. Rubber roofs are proven to be pliable, durable, and waterproof. Whatever polymer type they are made of, these roofs are designed for houses where asphalt shingles are not as suitable.

Generally, a Park City roofer will install rubber roofs on top of an existing roof. A rubber layer can be applied, sprayed or painted over the original roof until the entire roof surface is covered with rubber membrane. This saves you from labor costs because you don’t need to tear down your original roof to accommodate the new roof.

The Types of Rubber Roofs

Rubber roofs come in two kinds: seamed and seamless. Although you may see several types of rubber roofing in advertisements, they generally fall under any of these two categories. Seamed rubber roofs are rubber membranes that are stretched over the roof surface, folded over the roof edge and then fastened with screws.

On the other hand, seamless rubber roofs are applied as rubber in a liquid state that is painted or sprayed onto the roof. Once the rubber has cured, you will have a one-piece roof membrane with no seams. Installing a seamless rubber roof is relatively easy, but can be time-consuming.  Careful preparation of the old roof is the key to a long-lasting seamless rubber roof.

The Cost of Rubber Roofs

Rubber roofing is an expensive way to roof your home but you do get your money’s worth. Roof material is measured per square ft. and rubber roofs will cost you between $300 to $400 dollars per; while asphalt shingles are usually less than $100. However, rubber roofs can last twice as long as most types of roofing and can save you on energy costs. Despite your substantial initial cash out, you still save a considerable amount of time and money in the long run.

If you own a flat or low-sloped roof, it’s about time you experienced the many benefits of a rubber roof. You can easily find a Park City roofing contractor like S&S Roofs online for your rubbing roofing needs.


Photo courtesy of Wikimedia Commons

Photographer/Artist: Brian O’Donnell


Video courtesy of You Tube (
Video owner: epdmcoatings