Author Archives: aubrob


A typical workday for a roofer is usually spent putting up roofing systems for residential and commercial structures, restoring broken roof tiles, helping people find the best type of roofing material to purchase, and so on. Without a roofer Utah residents recommend, homeowners in the area might not have well-maintained roofs over their heads. Below are a few of the fixes that a trustworthy roofer might apply to your roofing concerns.

Roof Leakage

Any kind of roofing system is bound to suffer from leakage at some point. Without the aid of a professional roofer’s expertise, the slow trickling might end up pouring down like rain. To prevent this nightmare from happening, call on a roofer to place a moisture barrier underneath the affected membranes. This should work to stop water from entering and getting trapped inside the roof.

Shingle Blow-offs

Improper installation and fastening of flashing is the typical cause of roof blow-offs caused by strong winds. An established roofing company like S&S Roofing will send over experienced roofers to inspect the extent of the damage. Should a replacement be necessary, the contractors will remove the shingles in the affected area and clear out the nails and other roofing materials left behind to ensure that the installation will be done on a smooth and flat surface.

 

Poor Roof Maintenance

If you don’t have time to inspect your roof, then at least hire someone who can do the checking for you. The roofers Salt Lake City homeowners rely on offer services for regular roof maintenance to spare you from major roofing problems that would likely burn a whole in your pocket. This way, they can spot signs of damage early on and patch it up immediately.

Roof Repair

You might fancy yourself a handyman in the making, but the truth is that a professional roofer simply has more practical knowledge than you do about roof repair. A certified roofer knows exactly the kinds of repair methods best suited to address certain types of damage for specific kinds of roofing materials. When it comes to your roof, it’s better to let the experts handle the job.

Roofers Utah residents trust work to prevent the escalation of problems typically caused by poor maintenance and improper installation of roofing systems. Without them, numerous households are at the mercy of dangerous roofs. Good thing these professionals have the expertise to solve such problems.

 

Roof siding services are just as essential as shingle and underlayment repairs. Since air and water don’t just come from above, it’s important to have reinforced soffits and fascias. The proper installation, repairs, and maintenance of these components by reliable roofing companies in Utah will improve your roof’s resilience, safeguarding it and many other portions of your home from the harsh weather conditions in your area.

Roofing Adjustments in Utah

There is a variety of roofing options available to Utah residents. Utah’s climate changes from semiarid to arid throughout the year, and so regular soffit and fascia maintenance and cleaning is encouraged. However, if you’re after longevity and minimal maintenance, then a metal roof with an aluminum soffit and fascia will most likely meet your standards.

Soffit and Fascia Maintenance

Despite the durability of aluminum soffits and fascias, they still do require occasional cleaning and repairs because mildew and dirt can significantly hasten their deterioration. Fortunately, it’s not as difficult to repair a soffit or fascia because you don’t have to climb on the roof to accomplish the job. You also have the option of hiring a roofing contractor Park City residents trust to check on your roof’s siding.

Cleaning

You’ll need a tall ladder to clean the soffit and fascia. You’ll also need to have a sponge and a bucket of warm soap water, which is a mixture of dishwashing or laundry detergent and bleach. It’s advisable to focus on the indentations of the soffit and fascia because these sections hold more dirt and mildew than any other area on the siding.

Installation or Replacement

Leveling the J channel is one of the most important steps of soffit and fascia replacement or installation. You’d want to have leveled panels so that no dirt or water can penetrate your roof from the sides. The same principle goes for the installation of an F channel.

If you don’t have the time or necessary skills to do the job, there are experts who can help you out. S&S Roofing, one of several roofing companies Utah residents rely on, can help you with your siding concerns. Whether it’s a major clean-up, repair, or replacement, you can count on the professionals to get the job done.

 

Europe is known for a lot of wonderful things: the food, culture, history, and sights, among other things. Europe is beautiful, chic, and classy as proven by the high demand for European fashion. But did you know that the continent is known not only for its beautiful clothes but for its contribution to tile designs as well? In fact, many roofing tiles are of European origin.

Mediterranean roof tiles

Before you hire a roofer Utah homeowners or friends may have recommended, you might want to brush up on your roofing basics. Roof tiles trace their roots back to Greece in the third millennium B.C.(although some sources have disputed that fact, saying that China was first to use clay roof tiles as early as 10,000 B.C.) Evidence of the Greek’s use of these tiles was unearthed by archaeologists who found fragments of terracotta tiles in Lerna, southwest of Athens.

Mediterranean roof tile was historically made of clay and was touted for its fire-resistant properties. Generally, the tile featured a taper that allowed it to sit and fit onto the next one as the roof was being installed. Any roofer Park City residents may choose to do work on their roofs will tell you that this feature, in modern versions of this tile, helps to enhance the tiles’ capability to withstand extreme conditions.

Spanish roof tiles

Heavy Greek and Roman influence is apparent in the design of Spanish roof tiles—not surprisingly, given that both once colonized the Iberian Peninsula. These tiles are typically characterized by quarter-round tubes with ridges that help direct rainwater off the roof and, at the same time, work to secure the tiles in place. Spain introduced these tiles to the rest of the world at the height of its maritime power.

English roof tiles

English roof tiles evoke the charm of aristocratic country manors and old churches. Their design is largely influenced by the Normans, a race from Northern France that invaded England in the Middle Ages. Today, these roofing tiles come in a variety of shapes and colors that look beautiful in any type or style of home.

When choosing among Mediterranean, Spanish, English or any other kind of roof tile, it is recommended that you consult with a roof repair Utah professional. Contractors from roofing companies such as S&S Roofing can help you decide on the type of tile that will best suit your home.

 

The underlayment is the layer beneath your roof that provides a second line of defense against the elements. Today’s underlayment materials are made out of polyester or fiberglass, replacing the asphalt-saturated housewrap-like felt that was commonly used in homes before the 21st century. Under the International Residential Building Code, asphalt shingles are required to have an underlayment.

A Park City roofing contractor offers two kinds of underlayment materials, No. 15 and No. 30 felt. You can immediately spot the difference between the two: No. 30 underlayment is thicker and more rigid than the No. 15. Normally, the No. 30 underlayment would appear as the better choice, but the No. 15 underlayment also has its own advantages.

No. 15 underlayment

Modern innovation has made the underlayment significantly lighter than before. A No. 15 underlayment, despite its name, weighs about 4 pounds per 100 square feet. It is also ideal for low-slope roofing or roofs with slopes of 14 degrees (3:12) and above.

The National Roofing Contractors Association (NRCA) recommends having two layers of this kind of underlayment for roofs with slopes of 14 degrees (3:12) and 18 degrees (4:12). The double protection will prevent leaks from seeping into the roofing structure. However, the NRCA also emphasizes that two layers of the No. 15 underlayment don’t equal a layer of the No. 30 underlayment.

No. 30 underlayment

A Park City roofer would recommend the No. 30 underlayment for heavy-duty roofing. Being the thicker underlayment, the No. 30 variant can take the full brunt of the elements better than the No. 15 variant. On the other hand, roofing experts say the No. 30 underlayment should only be used for shingles that weigh more than 240 pounds per square foot.

Heavy tiles such as clay or slate fall under the heavy-duty underlayment category and have the added benefit of being longer lasting than most other roofing materials. In addition, unlike the No. 15 underlayment, the No. 30 variant is installed only as a single layer due to its weight of 9 pounds per 100 square feet.

Ultimately, your choice of underlayment depends on factors such as the material of your roofing and the local climate. It’s best to consult with a roofing company like S&S Roofing that offers services such as installation, replacement, and roof repair Salt Lake City homes can benefit from.

 

Try to look at your home from the outside. Stand right in the middle of your lawn and notice how the front of your house seems to have windows for eyes, the front door for a mouth, and maybe the triangular gable over the entrance for the nose. Aside from appearing to have a face, there’s one vital feature of your residence that personifies it—it can breathe. But if you were to ask a roofing contractor Park City residents recommend, they’d be more technical and tell you that a “breathing” house is a “well-ventilated” home.

If you live in an area where winters are cold and snowy, you might feel the need to keep your house sealed by covering attic ventilation ports and insulating the roof deck completely. Though this method could probably cut a few dollars off your utility bill, its effect on the health of your attic is damaging. An attic space without proper vents could ultimately lead to premature deterioration of your roof system, weakening of its structure, and formation of moisture that serves as an ideal breeding ground for harmful microorganisms. Here are a few tips that you must remember to keep your attic in good condition:

Ensure Adequate Ventilation through Attic Vents

There are several types of attic vents such as ridge vents, gable vents, and power vents. The vent size and style your home needs depends on your roof’s configuration and attic dimensions. Vents are very important, especially in the winter when they release warm moist air from your living space thereby preventing condensation.

Seek Professional Consultation

Attic ventilation isn’t accomplished by random placement of openings on your roof. It requires the expertise of roofing contractors Salt Lake City homeowners trust. Skilled roofers, like those employed at S&S Roofing, will calculate the level of intake and exhaust that your home needs. After determining how many and what type of vents your attic needs, they will advise you on what course of action to take as well as guide you throughout the process.

Install a Metal Roof

If you want to augment the moisture-fighting ability of your vents, switching to a metal roof could be a wise move. During a heavy snow fall, ice and snow can accumulate on your roof, obstructing the airflow to the attic and causing poor air circulation. Installing a metal roof prevents ice buildup because snow easily slides off it, thereby keeping your vents open and unblocked.

An attic that can breathe equates to a healthier home. Whether you need vents or a new roof, there are experts in roofing companies Utah locals consult who can answer your inquiries.

Roofs protect homes from extremes in weather and temperature. They need to remain intact despite constant exposure to damaging forces like sunlight, wind, rain, hail, and falling debris. For this reason, it only makes sense to work with the kind of professional roofers Salt Lake City residents hire—like S&S Roofing—for maintenance, repair, or replacement works.

Aside from weather conditions, the intrinsic properties of roofing materials greatly determine the longevity of a roof. For instance, asphalt shingles can last up to 35 years; metal roofs last a little longer, at 40 years; clay tiles remain intact up to 100 years; and slate roofs can last 200 years or even longer.

When choosing roofing materials, it pays to weigh the benefits. For instance, metal roofs are light and easy to install, and help regulate indoor temperatures. Slate roofs, although quite heavy, require minimal maintenance and offer excellent fire protection. But regardless of the material used, roofs inevitably break down and would eventually require repairs or replacement. Read on for some tips on how to go about this essential task.

All-Around Roofing

It is always a good idea to choose roofs that can withstand any type of adverse weather condition. New roof installations can cost anywhere from a couple of thousands to over $20,000; so homeowners would naturally want to maximize the life spans of their roofs.

Local weather patterns must also be considered. For example, metal or asphalt roofs are suitable in cities hardest hit by hurricanes and tornadoes because they can withstand strong winds. Meanwhile, the roofers Utah residents trust would normally advise against installing flat roofs of any material in areas that experience heavy winters since snow could easily accumulate and put undue pressure on the roof.

Roofs in cities like Salt Lake City that experience alternating hot and cold weather are prone to warping and rusting, factors which severely weaken them. Roof damage can lead to moisture problems and leaks inside the house. Necessary roof repairs must, therefore, be conducted at the first sign of trouble.

Repair Options

Roof repairs can either be classified as ‘tear-offs’ or ‘reroofs’. A ‘tear-off’ requires the old parts to be completely replaced with brand-new ones; this is perfect for leaky and old roofs. ‘Reroofing’ involves retaining the existing roof and replacing only parts which have been damaged beyond repair; a roof repair of this type is perfect for recently bought houses. Preventive repairs can also be carried out as soon as roof problems are detected.

In any event, roofing troubles need not go out of control. Salt Lake City residents can count on roofing companies in Utah like S&S Roofing for quality services and materials.